We offer a wide selection of oarlocks, oar sockets, boat fitting on sale specialty hardware, and boat cleat accessories to complement advantageous boats. Our oar sockets and standard oar locks are made within the USA by Perko. If you cherished this article and you also would like to obtain more info about boat fitting on sale please visit the web site. We manufacture our patent swivel oarlocks, outrigger oar brackets, and #1-1/2 horns.
from
Back to Top
The way to Size Your Oars
To find out the correct size oar on your boat measure the space between the port and starboard oar sockets. Then apply the Shaw and Tenney oar size system to find out the oar size that will present the correct 7:18 leverage ratio. This length will provide an oar the place 7/25 the size is inboard of the oarlocks and 18/25 of the oar is outboard of the oarlocks. It’s the best ratio to row virtually all boats. Sized accurately, when rowing your hands can be 1 to three inches apart and you’ll be pulling instantly in direction of your abdomen. If you are popping out of your oarlocks when rowing your oars are far too brief. In case you desire an overlapping grip, add 6″ to the calculated oar size. When you have multiple rowing station in your boat, measure each. Typically they would require two totally different size oars which is ok if you’re going to be rowing tandem and want two units. Otherwise you’ll need to compromise the correct length to work properly in each stations. In case you are rowing greater than 75% in a single station size the oar to that size. As always feel free to call us and were completely satisfied to help you choose the proper oar size and blade fashion on your boat.
The unique Shaw & Tenney Oar Length Formula
To help our customers measurement their oars accurately, we’ve been using the identical components since 1858: Measure the distance between the middle of the port and starboard oar sockets, which hold the oar locks on each gunnel. This is known as the “span” between the oarlocks. Divide the span by 2, after which add 2 to this number. The end result known as the “inboard loom length” of the oar. Multiply the loom length by 25, and then divide that number by 7. The result’s the right oar length in inches. Round up or right down to the closest 6″ increment.
Methods to Size Your Paddle
For conventional picket paddles the best size for the Stern paddler is the bridge of your nose or 6 inches lower than your height. For the bow paddler the paddle reaching the cleft of your chin or 9 inches less than your peak is right. For our Racine paddle if you’re over 5’6″ tall select the 63-1/2″ length. The shorter paddle if you’re under5’-6″tall.
When paddling solo we sometimes suggest a bow length paddle. For Canadian model solo most paddlers favor an even shorter paddle.